Power Tech Engineering
Fire Safety Design & Consultancy in Bangladesh
Fire safety design is the engineering that decides how a building will detect a fire, warn people, get them out and fight the fire, before anything is bought or installed. In Bangladesh it produces the drawings the Fire Service and Civil Defence reviews and the baseline every later audit is checked against.
This line covers the paper side of fire safety, which decides whether the hardware works. We design hydrant, sprinkler, alarm and suppression systems to NFPA and BNBC 2020, prepare the fire safety plan and support the FSCD approval, and audit existing buildings against the standard their buyers or regulators apply. Every job starts with a free site survey. Because our own team also installs, tests and maintains these systems, our designs are drawn by people who know what can actually be built on site.
At a glance
- Standards
- BNBC 2020 Part 4, NFPA 101, NFPA 13, NFPA 72, Fire Prevention and Extinguishing Act 2003
- Services
- Fire protection system design · Fire safety plan & approval · Fire safety audit & gap report
- Where
- Chattogram, Dhaka, Gazipur, Narayanganj
Services
Services under Fire Safety Design & Consultancy.
Fire Safety Design & Consultancy
Fire protection system design
Fire protection system design turns a building's fire risk into buildable drawings: where hydrants, sprinklers, detectors and pumps go, what size every pipe is, and how much water must be stored. Any new factory, high-rise or major extension needs it, because installers, FSCD and auditors all work from these drawings.
Learn moreFire Safety Design & Consultancy
Fire safety plan & approval
A fire safety plan is the set of drawings and documents that shows FSCD how your building detects fire, warns occupants, gets them out and fights the fire. Most factories, high-rises and public buildings need it approved. We prepare the plan, submit it, answer queries and attend the inspection.
Learn moreFire Safety Design & Consultancy
Fire safety audit & gap report
A fire safety audit inspects an operating building against the standard it must meet, such as BNBC 2020, NFPA, RSC or a buyer's code, and records every gap. You need one before a buyer or RSC inspection, after a change of use, or when you take over a building and do not know its condition.
Learn more
Design, approval or audit?
Pick by where your building is: on paper, waiting for clearance, or already operating.
| Service | Best for | How it works |
|---|---|---|
| Fire protection system design | Best for: New buildings, extensions and system upgrades before procurement | How: System layouts, hydraulic calculations, specifications and bill of quantities |
| Fire safety plan & approval | Best for: Owners who need FSCD clearance for a new or changed building | How: Prepare the plan set, submit, answer queries and attend inspection |
| Fire safety audit & gap report | Best for: Operating factories facing RSC, buyer or insurer inspections | How: Site inspection, spot tests and a graded gap report with fixes |
From free survey to lifetime support in 5 steps.
One team from the first site visit to the maintenance contract, so nothing falls between contractors.
- 01
Free site survey
An engineer visits and maps your risks.
- 02
Design & drawing
NFPA and BNBC 2020-compliant plans, with a written quote.
- 03
Supply & install
Certified brands, installed by our own team.
- 04
Test & commission
Full testing, reports and approval support.
- 05
24/7 maintenance
Scheduled maintenance and emergency call-outs.
Service areas
Fire Safety Design & Consultancy in Chattogram, Dhaka, Gazipur and Narayanganj.
Our engineers survey, install and maintain on site across these cities and the industrial zones around them. For a site elsewhere in Bangladesh, ask and we will tell you plainly whether we can cover it.
- Chattogram
- Dhaka
- Gazipur
- Narayanganj
Fire Safety Design & Consultancy: questions buyers ask
Design is the engineering: system layouts, pipe sizes, detector spacing, pump selection and calculations. The fire safety plan is the document set that presents the building's whole fire strategy, including escape routes, compartments and management, for review by FSCD. A good plan is built on a finished design, so we usually do both together.
BNBC 2020 Part 4 sets the national fire protection requirements, and the Fire Prevention and Extinguishing Act 2003 with its 2014 rules gives FSCD its inspection and licensing powers. Detailed system design commonly follows NFPA standards such as NFPA 13, 14, 20 and 72. Export factories may also be held to RSC or buyer standards.
Before the architectural drawings are final. Stair positions, shaft sizes, pump room location and water tank volume are hard to change once the structure is built. Bringing fire design in early lets those spaces be sized correctly, and it avoids redesign after an FSCD or buyer review.
Yes. An audit looks at what is on site against the applicable standard, whoever built it. We record what complies, what does not and what needs further testing, and we explain each finding so your own team or any contractor can act on it.
Guides
Read before you buy.
Compliance
Fire Safety Plan in Bangladesh: What It Includes and How Approval Works
What a fire safety plan in Bangladesh must contain, who needs one, and the step-by-step route from design to Fire Service approval.
3 min read
ReadCompliance
Garment Factory Fire Safety: A Checklist Before Your Next Audit
The fire and electrical safety points auditors check in RMG factories, from detection and alarms to exits, fire doors and electrical testing.
2 min read
Read
More from Power Tech Engineering
Other engineering services.
Service line
Fire Detection & Alarm
Addressable and conventional alarm systems that find a fire early and start evacuation.
Learn moreService line
Hydrant & Sprinkler
Hydrant networks, automatic sprinklers and UL-listed fire pump rooms.
Learn moreService line
Fire Suppression Systems
Clean agent, CO₂, foam and kitchen suppression where water would do damage.
Learn moreService line
Fire Doors & Emergency Exits
Fire-rated doors, panic hardware, firestop sealing and emergency exit lighting.
Learn moreService line
Electrical & Lightning Safety
SLD and ELD drawings, sub-stations, earthing and lightning protection.
Learn moreService line
Inspection, Testing & Commissioning
Fire system commissioning, IR, earth and thermographic tests, with signed reports.
Learn moreService line
Security & Comms
HD and IP CCTV, access control, PAVA voice evacuation and PABX systems.
Learn moreService line
Survey & Drone
RTK GNSS, total station, mouza survey and drone mapping with GIS.
Learn moreService line
Maintenance (AMC)
Annual maintenance contracts, scheduled servicing and 24/7 breakdown support.
Learn moreService line
Fire Safety Equipment Supply
Certified extinguishers, hose reels, hydrant fittings and firefighter PPE.
Learn more
Know your building is safe. Book in 60 seconds.
Tell us what you need and where. An engineer confirms your survey slot by phone or WhatsApp.
What happens next
- 1
We call or WhatsApp you to confirm a time.
- 2
An engineer visits and assesses your fire, electrical and security risks.
- 3
You get a written recommendation and quote. No charge, no obligation.
Your details stay private. No newsletters, no sales sequences.