Skip to content
Power TechEngineering

Power Tech Engineering

Fire Suppression Systems in Bangladesh

A fire suppression system is a fixed, automatic system that puts out a fire with a gas, foam or wet chemical instead of plain water. It protects rooms where water would cause damage or not work, such as server rooms, switchgear, fuel stores and commercial kitchens. The right agent depends on the hazard and whether people are present.

Sprinklers are the right answer for most of a building, but some rooms need something else. A data center cannot take water, burning fuel spreads on it, and hot cooking oil reacts violently with it. This line covers the four agent families we design and install: clean agent gas, carbon dioxide, foam and wet chemical. We start from the hazard and the people in the room, choose the agent, test the room's integrity where it matters and link the system to your fire alarm.

At a glance

Standards
NFPA 2001, NFPA 12, NFPA 11, NFPA 17A, NFPA 96, NFPA 72
Services
FM-200 & Novec 1230 clean agent · CO₂ suppression · Foam suppression · Kitchen hood suppression
Where
Chattogram, Dhaka, Gazipur, Narayanganj

Services

Services under Fire Suppression Systems.

Which suppression agent fits the room?

Choose from the hazard first, then check whether people work in the space.

FM-200 & Novec 1230 clean agentBest for: Server rooms, control rooms, archives and occupied electrical roomsHow: Gas floods the sealed room and leaves no residue on equipment
CO₂ suppressionBest for: Unoccupied switch rooms, generator enclosures, cable tunnels and machineryHow: CO₂ displaces oxygen; lockouts and delays protect anyone near the space
Foam suppressionBest for: Fuel tanks, diesel stores, chemical stores and loading baysHow: Foam blankets burning liquid, cutting off air and suppressing vapor
Kitchen hood suppressionBest for: Commercial kitchens with fryers, woks, grills and canteen rangesHow: Wet chemical sprays appliances, hood and duct, and shuts off fuel

From free survey to lifetime support in 5 steps.

One team from the first site visit to the maintenance contract, so nothing falls between contractors.

  1. 01

    Free site survey

    An engineer visits and maps your risks.

  2. 02

    Design & drawing

    NFPA and BNBC 2020-compliant plans, with a written quote.

  3. 03

    Supply & install

    Certified brands, installed by our own team.

  4. 04

    Test & commission

    Full testing, reports and approval support.

  5. 05

    24/7 maintenance

    Scheduled maintenance and emergency call-outs.

Service areas

Fire Suppression Systems in Chattogram, Dhaka, Gazipur and Narayanganj.

Our engineers survey, install and maintain on site across these cities and the industrial zones around them. For a site elsewhere in Bangladesh, ask and we will tell you plainly whether we can cover it.

  • Chattogram
  • Dhaka
  • Gazipur
  • Narayanganj

Chattogram office

#28, 1st floor, Diganta Khawja Tower, Bohoddarhat, Chattogram

Open in Maps

Dhaka office

2nd Floor, Alook Tower, Mohakhali, Dhaka-1212

Open in Maps

Fire Suppression Systems: questions buyers ask

A sprinkler system uses water and protects whole buildings. A suppression system uses a special agent, such as clean agent gas, CO₂, foam or wet chemical, and protects one room or hazard where water would cause damage or fail to put the fire out. Many buildings need both.

Cost depends on the agent, the volume or area protected, the number of cylinders, the detection and control panel, room sealing work and whether a room integrity test is needed. Agents and listed hardware are imported, so availability affects price. We size the system from a survey before quoting.

Clean agents such as HFC-227ea and FK-5-1-12 are designed for occupied spaces at the concentrations NFPA 2001 allows. CO₂ is different: at extinguishing concentrations it is lethal, so total flooding CO₂ is used only in normally unoccupied spaces with lockouts and pre-discharge alarms. We choose the agent with this in mind.

Each standard sets its own schedule, but most systems need a regular visual check by the owner and a full inspection by a qualified technician at least once a year. Kitchen systems are serviced every six months. Cylinders are weighed or level-checked, and detection and release circuits are tested.

Know your building is safe. Book in 60 seconds.

Tell us what you need and where. An engineer confirms your survey slot by phone or WhatsApp.

What happens next

  1. 1

    We call or WhatsApp you to confirm a time.

  2. 2

    An engineer visits and assesses your fire, electrical and security risks.

  3. 3

    You get a written recommendation and quote. No charge, no obligation.

Your details stay private. No newsletters, no sales sequences.

What do you need?

Step 1 of 3

Service needed
Building type Optional

No spam. Your details are used only to arrange the survey.